KG-350SR CNC Steady Rest Internal Compound Grinding Machine
CNC Steady Rest Internal Compound Grinding Machine
- Single grinding spindle+steady rest
- Max grinding length up to 350mm
- Full splash guard
- Fanuc controller
- X, Z axis stroke 500/700mm
KG-350SR equips with single grinding spindle and steady rest, the max grinding length is 350mm and max workpiece length is 500mm. This model is designed with cross structure on grinding spindle and fixed type workpeice spindle. This is perfect model for large and heavy type workpiece.
Wide span design with rigid roller type linear way
Double linear ways with 6 blocks to make sure axial rigidity and stability.
With 1 V 1 Flat box way design and non-stop oil supplying system for rails to make sure grinding straightness and lower friction coefficient during movement.
Sleeve type rigid spindle.
Easy to move workhead upon length of workpeices.
Suitable for long workpeice and provides stability during grinding.
- Spiral operation interface
- Conversational type operating interface
- Operating panel
- TOUCH-SENSING MONITOR
| Type | KG-350SR | |
|---|---|---|
| Working Capacity | Grinding dia, range | Ø 4 ~ Ø 320 mm |
| Max, grinding depth | 350 mm | |
| Controller System | Controller | FANUC 0i-TF |
| Workhead | Spindle speed | 0 ~ 1000 rpm |
| X-axis feedrate / Max stroke | 8 M/min / 500 mm | |
| X-axis minimum display unit | 0.0001 mm | |
| Swiveling angle | 0˚~+15˚ | |
| Worktable | Y-axis & Z-axis feed rate | Z : 6 M/min |
| Y-axis & Z-axis max. stroke | Z : 700 mm | |
| Y-axis & Z-axis minimum display unit | Z : 0.0001mm | |
| Y-axis swiveling angle | - | |
| Distance from spindle center to the ground | 1100 mm | |
| Swing of working Table | Ø 380 mm | |
| Hydraulic System | Oil Tank Capacity | 30 L |
| Cooling System | Coolant Tank Capacity | 400 L |
| Motor | Hydraulic motor | 0.75 Kw (1HP) |
| Coolant pump motor | 0.75 Kw (1HP) | |
| X-axis & Y-axis & Z-axis servomotor | X : 2.5 Kw / Z : 2.5 Kw | |
| Grinding wheel motor (kw) | Z : 4.0 ， (5HP) | |
| Workhead motor | 1.8Kw(Brushless Servo) | |
| Others | Automatic lubricator | - |
| Machine dimension (LxWxH)-including accessories | 4300 x 2500 x2050 mm | |
| Machine Weight | 7500 kg | |
| Standard accessories | CNC Controller | |
| Inverter for X-axis workhead motor | ||
| Inverter for Z-axis grinding spindle motor | ||
| Z-axis grinding spindle | ||
| Hydraulic chuck | ||
| Hydraulic cylinder | ||
| Tricolor alarm lamp | ||
| Working lamp | ||
| Tool box | ||
| Automatic lubricator | ||
| Coolant tank and pump | ||
| Paper filter | ||
| Magnetic separator | ||
| Hydraulic tank with pump | ||
| Internal heat radiation system inside cabinet | ||
| Diamond Dresser | ||
| Leveling bolts and pads | ||
| Mechanical, electrical operation manuals | ||
| Fully-enclosed cover | ||
